Jacro 200

TECHNICAL SPECIFICATIONS: 

1. Unit Power Supply :

                - Engine Diesel Vertical Kubota 3 Cylinder 1703-E2B-EU-X2 Made in Japan Original .

                - Power 32 Hp/ 3000 Rpm

                - Hydraulic Power by Gear Pump ALP3AD40+16 Marzocchi (For Rotary, and For up/down ) Max.

                - Pressure 3000 Psi/210 bar

                - Hydraulic Tank : 80 litre

                - Diesel Fuel tank : 60 litre

2. Unit Control Device :

                - Hand Control Valve 3Bank 3/4” Suction 1DT2SC Branded Integral Italy HDM 20-3D/ d5

                ( For Hydraulic Rotation, Hydraulic Winch, And Hydraulic Wire line ).

                - Hand Control Valve 3Bank ½” Mono 1DT2SC Branded Integral Italy HDM 18-50 ½”

                ( For Hydraulic Up Down , Hyd. Sleding Gearbox and Hydraulic Clamp Chuck Assembly ).

                - Relief Valve : For Adjustment pressure up/down Integral RV2-1/2” –F,

                - Max Pressure 3000 Psi. Regulator Valve : For adjustment flow up/down Integral FRV2-1/2”

                Max flow 150 liter / minute, Brake Valve : For adjustment brake winch and wire line,

                Branded Integral Italy CBV2 ½” 0-3000 Psi, Pressure Gauge : By. Skon USA 0-250 Psi

3. Unit Power Device :

3.1 Rotary Head Motor Jacro 200 5(RH ½”) 4000 Series 109-1116 -006 By. Eaton USA

                - Speed Power : 0-1200 Rpm, Power Pressure : 0-3000 Psi, Speed Rotary : 700-1500 Rpm

3.2 Up/Down Cylinder Hydraulic Jacro 200 5CH Dia 63 x 73 x 40 x Stroke 1800mm

                - Torsi Capacity : 915MM (66641 lb/in), Speed Power : 1000MM/10 Second, In / Out

                Port : 1/2” SAI O-ring

3.3 Wire Line Hydraulic Motor Jacro 200 5(RH 2/2) S Series 103-1032-010 By. Eaton USA

                - Torsi Capacity : 452NMC (3961 lb/in), Speed Power : 0-250 Rpm, In/Out port : ½” SAI

                O-ring -

3.4 Winch Hydraulic Motor Jacro 200 5(RH 2/2) 2000 Series 104-1228-006 By. Eaton USA

                - Torsi Capacity : 452NMC (3961 lb/in). Speed Power : 0-250 Rpm, In/Out port : ½” SAI

                O-ring

3.5 Cylinder Sleding Gearbox Jacro 200 (RH 2/2) Ø 40 x 50 x 25 Stroke 250 mm

                - Torsi Capacity : 542 NMC (5675 lb/in), Speed Power : 0-500Meter/ 1.5 Second, In/Out

                port : 5/8” SAI O-ring

3.6 Hydraulic Clamp Chuck Assy Jacro 200 (RH 2/2) Ø 40 x 50 x 25 Stroke 70 mm

                - Torsi Capacity : 300 NMC (5675 lb/in),

                - Speed Power : 0-1 Meter/ 1.5 Second,

                - In/Out port : ½” SAI O-ring

                - Drill Pipe : 50 pipe (seemles) NQ 3” @ 3 meter

                - Drill Bite : Wingbite / PCD

                - Water hose : hose polypipe

                - Core barel : Assy NQ

OPERATIONAL RECOMMENDATIONS

Capacity Drilling Deep Down:

• NQ 200 Meters (Special Conditions)
• HQ 100 Meters (Special Conditions)
• PQ 50 Meters (Special Conditions)

DRILLING PERFORMANCE

Coal Project:

Open Hole: 50.00 m – 100.00 m /shift

Full Coring: 20.00 m – 70.00 m /shift