Jacro 300

TECHNICAL SPECIFICATIONS: 

1. Unit Power Supply :

                - Engine Diesel Kubota 4 Cylinder V2203-BBEC-SAE Made in Original Japan.

                - Power 40 Hp/ 3000 Rpm

                - Hydraulic Power by Pump Commercial Double P50-17979-FAA ( 50 Ltr/Minute And

                22 Ltr/Minute ) Commercial - USA

                - Pressure 3000 Psi/210 bar

                - Hydraulic Tank : 120 litre

                - Diesel Fuel tank : 30 litre

2. Unit Control Device :

                - Hand Control Valve 3Bank 3/4” Branded Bucher Hidroirma Integral Italy HDS 20 ¾” 15

                ( For Hydraulic Rotation, Hydraulic Winch, And Hydraulic Wire line ).

                - Hand Control Valve 3Bank ½” Branded Bucher Hidroirma Integral Italy HDS 18-3D/d5

                ( For Hydraulic Up Down , Hyd. Sleding Gearbox and Hydraulic Clamp Chuck Assembly ).

                - Relief Valve : For Adjustment pressure up/down VickersC175 –F,

- Max Pressure 3000 Psi. Regulator Valve : For adjustment flow up/down Parker F-800 ½”

                Max flow 150 liter / minute, Brake Valve : For adjustment brake winch and wire line,

                Branded Vickers USA FPOD ½” 0-3000 Psi, Pressure Gauge : By.Vicker USA 0-450 Psi

3. Unit Power Device :

3.1 Rotary Head Motor Jacro 300 (RH ½”) Series Commercial Motor M75-17979

                - Speed Power : 0-1000 Rpm (Continue), Power Pressure : 0-3000 Psi, Speed Rotary :

                700-1500 Rpm, In/Out Put : 5/8” SAI 0-Ring

3.2 Up/Down Cylinder Hydraulic Jacro 300 CH Dia 65 x 40 x 75 x Stroke 2000mm

                - Torsi Capacity : 512Nm (64711 lb/in), Speed Power : 1000MM/10 Second, In / Out

                Port : 1/2” SAI O-ring

3.3 Wire Line Hydraulic Motor Jacro 300 (RH 2/2) Series 104-1939-006 By. Eaton USA

                - Torsi Capacity : 452NMC (3961 lb/in), Speed Power : 0-250 Rpm, In/Out port : ½” SAI

                O-ring

3.4 Winch Hydraulic Motor Jacro 300 (RH 2/2) Series 4000-109-1769-006 By. Eaton USA

                - Torsi Capacity : 926NM/CM2 (10520 lb/in). Speed Power : 0-100 Rpm, In/Out port : ½”

                JIC-NPT

3.5 Cylinder Sleding Gearbox Jacro 300 (RH 2/2) Ø 40 x 50 x 25 Stroke 250 mm

                - Torsi Capacity : 542 NM/Cm3 (8750 lb/in), Speed Power : 0-500 Rpm,

                In/Out port : 5/8” SAI O-ring

3.6 Hydraulic Clamp Chuck Assy Jacro 300 (RH 2/2) Ø 40 x 50 x 25 Stroke 70 mm By. Vikers

                USA (Size; NQ, HQ, PQ, & NW)

                - Torsi Capacity : 542 NMC (8750 lb/in),

                - Speed Power : 0-300 Rpm

                - In/Out port : 3/8” SAI O-ring

3.7 Hydraulic Cylinder Lift Mash Jacro 300 ( RH 2/2 ) Ø 50 x 60 x 30 Stroke 650 By Vickers.

                - Torsi Capacity : 477 NM ( 41200 lb/in ).

                - Speed Power : 0–120 Rpm.

                - In / Out Port : 1/2” SAI O-Ring

3.8 Cylinder Dump Mas Jacro 300 RH 1/2” Ø 63 x 73 x 40 x 300mm For Sock Mash

                - Torsi Capacity : 117 NM ( 66641 lb/in )

                - Speed Power : 0-500 Rpm/ 25 Second

                - In/Out port : 1/2” SAI O-Ring

                - Oil Cooler : 250 Ltr

                - Water Injection Pump : Yanmar TF 85 + Sanchin 120

                - Drill Pipe : 50 pipe (seemles) NQ3” / HQ3” @ 3 meter

                - Drill Bite : Wingbite / PCD

                - Water hose : hose polypipe

                - Core barel : Assy NQ / HQ

OPERATIONAL RECOMMENDATIONS

Capacity Drilling Deep Down:

• NQ 300 Meters (Special Conditions)
• HQ 150 Meters (Special Conditions)
• PQ 75 Meters (Special Conditions)

DRILLING PERFORMANCE
Coal Project:

Open Hole: 50.00 m – 150.00 m /shift

Full Coring: 30.00 m – 100.00 m /shift